DocuGuru
Oxford University Press

Transportation Safety and Environment Template

Write in a clean editor, then format for Transportation Safety and Environment in one click — DocuGuru applies the official Oxford University Press template with author–year references and exports a submission-ready PDF plus the editable LaTeX source. Free to start.

Use this template

About the Transportation Safety and Environment format

Transportation Safety and Environment is a peer-reviewed journal published by Oxford University Press, covering Railway Systems and Energy Efficiency, Traffic and Road Safety, Railway Engineering and Dynamics.

PublisherOxford University Press
Reference styleAuthor–year (OUP)
Author–year — (Smith, 2023) in the text
Smith, A., Jones, B. and Lee, C. (2023) 'A representative article title', Transportation Safety and Environment, 12(3), pp. 45–58.

Formats any DOI in the closest standard style — Transportation Safety and Environment has no published style definition, so this is an approximation. No sign-up.

Publishes research inRailway Systems and Energy Efficiency Traffic and Road Safety Railway Engineering and Dynamics Traffic Prediction and Management Techniques Traffic control and management
ISSN2631-4428
Citation impact (2-yr)2.21
h-index27
i10-index93
Total citations3,467
Article processing charge$1,500
Open accessYes
Top institutions publishing hereCentral South University
Journal websiteacademic.oup.com
You getA submission-ready PDF and the editable LaTeX source — ready to submit.

Papers published in Transportation Safety and Environment per year

20
2019
31
2020
30
2021
78
2022
50
2023
26
2024
76
2025

Citation impact of Transportation Safety and Environment by publication year

829
2019
576
2020
387
2021
994
2022
330
2023
143
2024
129
2025

Citations each year’s papers have accumulated so far — the most recent years are still building up.

Most-cited papers in Transportation Safety and Environment

Review of research on high-speed railway aerodynamics in China

Hong-qi Tian · 1 Jul 2019

Abstract High-speed railway aerodynamics is the key basic science for solving the bottleneck problem of high-speed railway development. This paper systematically summarizes the aerodynamic research relating to China’s high-speed railway network. Seven key research advances are comprehensively discussed, including train aerodynamic drag-reduction technology, train aerodynamic noise-reduction technology, train ventilation technology, train crossing aerodynamics, train/tunnel aerodynamics,…

265 citations Cite SaveGo to paper →
Computer vision for road imaging and pothole detection: a state-of-the-art review of systems and algorithms

Nachuan Ma, Jiahe Fan, Wenshuo Wang et al. · 21 Nov 2022

Abstract Computer vision algorithms have been utilized for 3-D road imaging and pothole detection for over two decades. Nonetheless, there is a lack of systematic survey articles on state-of-the-art (SoTA) computer vision techniques, especially deep learning models, developed to tackle these problems. This article first introduces the sensing systems employed for 2-D and 3-D road…

131 citations Cite SaveGo to paper →
A review of applications of visual inspection technology based on image processing in the railway industry

Scarlett Liu, Quandong Wang, Yiping Luo · 12 Dec 2019

Abstract In order to ensure the safety of railway transportation, it is necessary to regularly check for faults and defects in the railway system. Visual inspection technology is conducive to improving the low efficiency, poor economy and inaccurate detection results of traditional detection methods. This paper introduces the research and contribution of various scholars in…

118 citations Cite SaveGo to paper →
Energy storage devices in electrified railway systems: A review

Xuan Liu, Kang Li · 2 Jul 2020

Abstract As a large energy consumer, the railway systems in many countries have been electrified gradually for the purposes of performance improvement and emission reduction. With the widespread utilization of energy-saving technologies such as regenerative braking techniques, and in support of the full electrification of railway systems in a wide range of application conditions, energy…

112 citations Cite SaveGo to paper →
An integrated review of automation and robotic technologies for structural prefabrication and construction

Cheav Por Chea, Yu Bai, Xuebei Pan et al. · 29 May 2020

Abstract Building construction has developed from the use of primitive tools to that of machinery, with a tendency toward automation. Automation of processes and robotics can improve efficiency, accuracy and safety in construction. On the other hand, structural prefabrication for construction is increasingly being adopted worldwide to enhance productivity and to alleviate the environmental impact…

87 citations Cite SaveGo to paper →

Transportation Safety and Environment template — frequently asked questions

How do I write a paper in the Transportation Safety and Environment format?
In DocuGuru you write your manuscript in a normal editor — no LaTeX setup required — and select the Transportation Safety and Environment template. When you export, DocuGuru compiles the paper into the official Oxford University Press format and hands you a submission-ready PDF along with the editable LaTeX source.
What reference style does Transportation Safety and Environment use?
Transportation Safety and Environment uses Author–year (OUP) references, shown as author–year markers such as (Smith, 2023) in the text. DocuGuru formats every in-text citation and the reference list in this exact style automatically. A reference appears like this: Smith, A., Jones, B. and Lee, C. (2023) 'A representative article title', Transportation Safety and Environment, 12(3), pp. 45–58.
Do I need to know LaTeX to submit to Transportation Safety and Environment?
No. DocuGuru generates the oup-authoring-template LaTeX class and compiles the PDF for you in the background, so you get a Oxford University Press-ready Transportation Safety and Environment document without writing any LaTeX. If you do want it, the LaTeX source is included in the export.
Can I import an existing draft into the Transportation Safety and Environment template?
Yes. Paste or upload your current manuscript — Word, LaTeX, Markdown, or plain text — and DocuGuru reflows it into the Transportation Safety and Environment format with correct headings, figures, tables, and author–year citations.
Who publishes Transportation Safety and Environment?
Transportation Safety and Environment is a multidisciplinary journal published by Oxford University Press. DocuGuru's Transportation Safety and Environment template matches Oxford University Press's official submission format.
Can I export a submission-ready Transportation Safety and Environment PDF?
Yes — DocuGuru produces a PDF built with the official Transportation Safety and Environment template (the oup-authoring-template class) that is ready to submit to Oxford University Press, together with the matching LaTeX source files.
How much does the Transportation Safety and Environment template cost?
You can start writing in the Transportation Safety and Environment template for free. Exporting the final submission-ready Transportation Safety and Environment PDF and LaTeX source is part of DocuGuru's paid plans — see the app for current pricing.
Use the Transportation Safety and Environment template