DocuGuru
IEEE

IEEE Transactions on Parts Materials and Packaging Template

Write in a clean editor, then format for IEEE Transactions on Parts Materials and Packaging in one click — DocuGuru applies the official IEEE template with numbered references and exports a submission-ready PDF plus the editable LaTeX source. Free to start.

Use this template

About the IEEE Transactions on Parts Materials and Packaging format

IEEE Transactions on Parts Materials and Packaging is a peer-reviewed journal published by IEEE, covering Semiconductor materials and devices, Electronic Packaging and Soldering Technologies, Electrical Contact Performance and Analysis.

PublisherIEEE
Reference styleNumbered (IEEE)
Numbered — [1], [2] in the text
[1] A. Smith, B. Jones, and C. Lee, "A representative article title," IEEE Transactions on Parts Materials and Packaging, vol. 12, no. 3, pp. 45–58, 2023.

Formats any DOI in IEEE Transactions on Parts Materials and Packaging style. No sign-up.

Publishes research inSemiconductor materials and devices Electronic Packaging and Soldering Technologies Electrical Contact Performance and Analysis Diverse Scientific and Economic Studies Biotechnology and Related Fields
ISSN0018-9502
h-index15
i10-index28
Total citations879
Top institutions publishing hereWestinghouse Electric (United States)
Journal websiteintl.ieeexplore.ieee.org
You getA submission-ready PDF and the editable LaTeX source — ready to submit.

Papers published in IEEE Transactions on Parts Materials and Packaging per year

67
1965
23
1966
31
1967
24
1968
26
1969
23
1970
12
1971
1
2017

Citation impact of IEEE Transactions on Parts Materials and Packaging by publication year

120
1965
42
1966
115
1967
135
1968
260
1969
149
1970
57
1971
1
2017

Citations each year’s papers have accumulated so far — the most recent years are still building up.

Most-cited papers in IEEE Transactions on Parts Materials and Packaging

Magnetically Ordered Ferroelectric Materials

S. M. Skinner · 1 Jun 1970

The varieties of compounds and solid solutions in which simultaneous ferroelectric properties and magnetic order have been demonstrated are reviewed and literature references are given. Materials investigated so far have contributed to fundamental understandings of processes in crystals and a variety of techniques and subtle inferences have been required in their investigation. Classification of some…

62 citations Cite SaveGo to paper →
Theoretical and Experimental Investigations of the Dynamic Molten Bridge

Takao Utsumi · 1 Mar 1969

It was theoretically demonstrated and experimentally confirmed that molten bridges can be categorized into two types; first, static bridges where the velocity of separation is sufficiently low that the volume of the molten metal is independent of the velocity, and second, the dynamic bridge where the velocity of separation is sufficiently high that the volume,of…

44 citations Cite SaveGo to paper →
Hybrid Transformers

Emanuela Sartori · 1 Sep 1968

The ideal four-port hybrid transformer is characterized by the following desirable properties: a biconjugacy between alternate sets of ports, an impedance match at each port, the ability to split power in any desired proportion between two receiving ports without incurring internal losses, and a 180° phase inversion in one of the four possible transmission voltage…

43 citations Cite SaveGo to paper →
The Chemistry of Failure of Aluminum Electrolytic Capacitors

Robert S. Alwitt, Reginald G. Hills · 1 Sep 1965

Common failure modes of aluminum electrolytic capacitors are due to chemical reactions between electrodes and electrolyte. From capacitance and weight change data and electron micrographs it is proposed that the attack of anode foil is primarily dissolution of oxide dielectric; that of cathode foil involves metal dissolution with hydrogen evolution.

40 citations Cite SaveGo to paper →
The Failure Mode and Lifetime of Static Contacts

Eisuke TAKANO, Kousuke Mano · 1 Jun 1968

This paper describes the failure mode due to corrosion at the contacting surfaces of static contacts in connectors and mechanical wiring connections. Copper static contacts with no mechanical separation fail to maintain electrical continuity when temperature-cycled from 20 to 200°C. Electron diffraction analysis and microscopic inspection show that this failure mode is due to growth…

36 citations Cite SaveGo to paper →

IEEE Transactions on Parts Materials and Packaging template — frequently asked questions

How do I write a paper in the IEEE Transactions on Parts Materials and Packaging format?
In DocuGuru you write your manuscript in a normal editor — no LaTeX setup required — and select the IEEE Transactions on Parts Materials and Packaging template. When you export, DocuGuru compiles the paper into the official IEEE format and hands you a submission-ready PDF along with the editable LaTeX source.
What reference style does IEEE Transactions on Parts Materials and Packaging use?
IEEE Transactions on Parts Materials and Packaging uses Numbered (IEEE) references, shown as numbered [1], [2] markers in the text. DocuGuru formats every in-text citation and the reference list in this exact style automatically. A reference appears like this: [1] A. Smith, B. Jones, and C. Lee, "A representative article title," IEEE Transactions on Parts Materials and Packaging, vol. 12, no. 3, pp. 45–58, 2023.
Do I need to know LaTeX to submit to IEEE Transactions on Parts Materials and Packaging?
No. DocuGuru generates the IEEEtran LaTeX class and compiles the PDF for you in the background, so you get a IEEE-ready IEEE Transactions on Parts Materials and Packaging document without writing any LaTeX. If you do want it, the LaTeX source is included in the export.
Can I import an existing draft into the IEEE Transactions on Parts Materials and Packaging template?
Yes. Paste or upload your current manuscript — Word, LaTeX, Markdown, or plain text — and DocuGuru reflows it into the IEEE Transactions on Parts Materials and Packaging format with correct headings, figures, tables, and numbered citations.
Who publishes IEEE Transactions on Parts Materials and Packaging?
IEEE Transactions on Parts Materials and Packaging is a engineering and computer science journal published by IEEE. DocuGuru's IEEE Transactions on Parts Materials and Packaging template matches IEEE's official submission format.
Can I export a submission-ready IEEE Transactions on Parts Materials and Packaging PDF?
Yes — DocuGuru produces a PDF built with the official IEEE Transactions on Parts Materials and Packaging template (the IEEEtran class) that is ready to submit to IEEE, together with the matching LaTeX source files.
How much does the IEEE Transactions on Parts Materials and Packaging template cost?
You can start writing in the IEEE Transactions on Parts Materials and Packaging template for free. Exporting the final submission-ready IEEE Transactions on Parts Materials and Packaging PDF and LaTeX source is part of DocuGuru's paid plans — see the app for current pricing.
Use the IEEE Transactions on Parts Materials and Packaging template