Write in a clean editor, then format for Journal of Engineered Fibers and Fabrics in one click — DocuGuru applies the official SAGE template with author–year references and exports a submission-ready PDF plus the editable LaTeX source. Free to start.
Journal of Engineered Fibers and Fabrics is a peer-reviewed journal published by SAGE, covering Textile materials and evaluations, Dyeing and Modifying Textile Fibers, Advanced Sensor and Energy Harvesting Materials.
| Publisher | SAGE |
|---|---|
| Reference style | Author–year (Harvard) Author–year — (Smith, 2023) in the text Smith, A., Jones, B. and Lee, C. (2023) 'A representative article title', Journal of Engineered Fibers and Fabrics, 12(3), pp. 45–58.
Formats any DOI in Journal of Engineered Fibers and Fabrics style. No sign-up. |
| Publishes research in | Textile materials and evaluations Dyeing and Modifying Textile Fibers Advanced Sensor and Energy Harvesting Materials Mechanical Behavior of Composites Electrospun Nanofibers in Biomedical Applications |
| ISSN | 1558-9250 |
| Citation impact (2-yr) | 2.76 |
| h-index | 50 |
| i10-index | 500 |
| Total citations | 16,693 |
| Article processing charge | $1,900 |
| Open access | Yes |
| Top institutions publishing here | Jiangnan University |
| Journal website | us.sagepub.com |
| You get | A submission-ready PDF and the editable LaTeX source — ready to submit. |
Citations each year’s papers have accumulated so far — the most recent years are still building up.
Electrospinning is a process that produces continuous polymer fibers with diameters of a nanometric scale. Nylon 6 in formic acid was electrospun to obtain the nanofibers. Fibers with different diameters were obtained using flow rates of 0.1, 0.5, 1 and 1.5 mL/hr, 20 wt% solution concentration, with an applied voltage of 20 kV and 15…
This paper outlines the story of the inventions and discoveries that directly relate to the genesis and development of electrostatic production and drawing of fibres: electrospinning. Current interest in the process is due to the ease with which nano-scale fibers can be produced in the laboratory. In 1600, the first record of the electrostatic attraction…
Disposable N95 filtering facepiece respirators (FFRs) certified by the National Institute for Occupational Safety and Health (NIOSH) are widely used by healthcare workers to reduce exposures to infectious biological aerosols. There is currently major concern among public health officials about a possible shortage of N95 FFRs during an influenza pandemic. Decontamination and reuse of FFRs…
The purpose of this study was to measure and compare the biodegradability of fabrics in laboratory and large scale composting environments. Cotton jersey fabrics with three levels of finishing treatments (scoured and bleached, softener added and resin added) and a polyester jersey fabric were tested. Under controlled laboratory conditions, the carbon dioxide produced was monitored…
This paper studies the influence of fabric's structure on the thermal and moisture management properties of knitted fabrics made of two types of yarns with thermo-regulating effect: Coolmax® and Outlast®. The main purpose of this study was the selection of the most adequate fabric, to be used in summer and winter sportswear. The results demonstrated…
Australian & New Zealand Journal of Psychiatry
Clinical Rehabilitation
Criminology & Criminal Justice
Entrepreneurship Theory and Practice
European Journal of International Relations
Human Factors: The Journal of the Human Factors and Ergonomics Society
Journal of Composite Materials
Journal of Intensive Care Medicine
