DocuGuru
ASCE

Journal of the Waterways Harbors and Coastal Engineering Division Template

Write in a clean editor, then format for Journal of the Waterways Harbors and Coastal Engineering Division in one click — DocuGuru applies the official ASCE template with author–year references and exports a submission-ready PDF plus the editable LaTeX source. Free to start.

Use this template

About the Journal of the Waterways Harbors and Coastal Engineering Division format

Journal of the Waterways Harbors and Coastal Engineering Division is a peer-reviewed journal published by ASCE, covering Coastal and Marine Dynamics, Ocean Waves and Remote Sensing, Fluid Dynamics Simulations and Interactions.

PublisherASCE
Reference styleAuthor–year (ASCE)
Author–year — (Smith, 2023) in the text
Smith, A., B. Jones, and C. Lee. (2023). "A representative article title." Journal of the Waterways Harbors and Coastal Engineering Division, 12(3), 45–58.

Formats any DOI in Journal of the Waterways Harbors and Coastal Engineering Division style. No sign-up.

Publishes research inCoastal and Marine Dynamics Ocean Waves and Remote Sensing Fluid Dynamics Simulations and Interactions Wave and Wind Energy Systems Ship Hydrodynamics and Maneuverability
ISSN0044-8028
h-index32
i10-index92
Total citations4,543
Top institutions publishing hereUnited States Department of the Army
You getA submission-ready PDF and the editable LaTeX source — ready to submit.

Papers published in Journal of the Waterways Harbors and Coastal Engineering Division per year

83
1970
91
1971
70
1972
54
1973
51
1974
52
1975
61
1976

Citation impact of Journal of the Waterways Harbors and Coastal Engineering Division by publication year

905
1970
735
1971
584
1972
532
1973
530
1974
766
1975
487
1976

Citations each year’s papers have accumulated so far — the most recent years are still building up.

Most-cited papers in Journal of the Waterways Harbors and Coastal Engineering Division

Friction Factor under Oscillatory Waves

J. William Kamphuis · 1 May 1975

Tests were performed in an oscillating water tunnel to determine the relationships between wave parameters and resulting bottom friction and shear stresses. The test results are presented in Stanton-type wave friction factor diagrams and results are compared with existing semitheoretical expressions. Transitions between flow regimes are also defined.

300 citations Cite SaveGo to paper →
Water Waves Generated by Landslides

Edward K. Noda · 1 Nov 1970

The problem of water waves generated by landslides is studied by considering two distinct types of landslide; vertical and horizontal. The vertical landslide is studied by assuming that the landslide is modeled by a two-dimensional box falling vertically. A horizontal landslide is one which enters and moves through the water horizontally and is modeled analytically…

229 citations Cite SaveGo to paper →
Longshore Transport Computations

E.W. Bijker · 1 Nov 1971

The longshore transport along a sandy beach resulting from the combination of a longshore current and waves is computed. This computational procedure is based on the principle that because of the waves the bed shear of the current is increased. The bed load can be computed with any bed load formula (the formula of Frijlink…

176 citations Cite SaveGo to paper →
Maximum Breaker Height

Richard J. Weggel · 1 Nov 1972

Based on a re-evaluation of available experimental data on breaking waves, a relationship between the breaker height-breaking depth ratio, the incident wave steepness and the beach slope is found. This relationship, when combined with experimental observations of breaker travel, permits an estimate of the maximum breaking wave height a coastal structure might experience given a…

175 citations Cite SaveGo to paper →
Wave Transmission through Porous Structures

Ole Secher Madsen · 1 Aug 1974

Assuming long, normally incident waves on a homogeneous porous structure of rectangular cross section, a simple explicit solution for the transmission and reflection coefficients are obtained from a linearized theory. The relationship between the nonlinear flow resistance in the porous medium and its equivalent linear form is obtained in explicit form. Empirical relationships for the…

167 citations Cite SaveGo to paper →

Journal of the Waterways Harbors and Coastal Engineering Division template — frequently asked questions

How do I write a paper in the Journal of the Waterways Harbors and Coastal Engineering Division format?
In DocuGuru you write your manuscript in a normal editor — no LaTeX setup required — and select the Journal of the Waterways Harbors and Coastal Engineering Division template. When you export, DocuGuru compiles the paper into the official ASCE format and hands you a submission-ready PDF along with the editable LaTeX source.
What reference style does Journal of the Waterways Harbors and Coastal Engineering Division use?
Journal of the Waterways Harbors and Coastal Engineering Division uses Author–year (ASCE) references, shown as author–year markers such as (Smith, 2023) in the text. DocuGuru formats every in-text citation and the reference list in this exact style automatically. A reference appears like this: Smith, A., B. Jones, and C. Lee. (2023). "A representative article title." Journal of the Waterways Harbors and Coastal Engineering Division, 12(3), 45–58.
Do I need to know LaTeX to submit to Journal of the Waterways Harbors and Coastal Engineering Division?
No. DocuGuru generates the ascelike-new LaTeX class and compiles the PDF for you in the background, so you get a ASCE-ready Journal of the Waterways Harbors and Coastal Engineering Division document without writing any LaTeX. If you do want it, the LaTeX source is included in the export.
Can I import an existing draft into the Journal of the Waterways Harbors and Coastal Engineering Division template?
Yes. Paste or upload your current manuscript — Word, LaTeX, Markdown, or plain text — and DocuGuru reflows it into the Journal of the Waterways Harbors and Coastal Engineering Division format with correct headings, figures, tables, and author–year citations.
Who publishes Journal of the Waterways Harbors and Coastal Engineering Division?
Journal of the Waterways Harbors and Coastal Engineering Division is a engineering and computer science journal published by ASCE. DocuGuru's Journal of the Waterways Harbors and Coastal Engineering Division template matches ASCE's official submission format.
Can I export a submission-ready Journal of the Waterways Harbors and Coastal Engineering Division PDF?
Yes — DocuGuru produces a PDF built with the official Journal of the Waterways Harbors and Coastal Engineering Division template (the ascelike-new class) that is ready to submit to ASCE, together with the matching LaTeX source files.
How much does the Journal of the Waterways Harbors and Coastal Engineering Division template cost?
You can start writing in the Journal of the Waterways Harbors and Coastal Engineering Division template for free. Exporting the final submission-ready Journal of the Waterways Harbors and Coastal Engineering Division PDF and LaTeX source is part of DocuGuru's paid plans — see the app for current pricing.
Use the Journal of the Waterways Harbors and Coastal Engineering Division template