Write in a clean editor, then format for Advances in Polymer Technology in one click — DocuGuru applies the official Wiley template with author–year references and exports a submission-ready PDF plus the editable LaTeX source. Free to start.
Advances in Polymer Technology is a peer-reviewed journal published by Wiley, covering Polymer crystallization and properties, Polymer Nanocomposites and Properties, Rheology and Fluid Dynamics Studies.
| Publisher | Wiley |
|---|---|
| Reference style | Author–year (Chicago) Author–year — (Smith, 2023) in the text Smith, Ada, Ben Jones, and Cara Lee. 2023. "A Representative Article Title." Advances in Polymer Technology 12 (3): 45–58.
Formats any DOI in Advances in Polymer Technology style. No sign-up. |
| Publishes research in | Polymer crystallization and properties Polymer Nanocomposites and Properties Rheology and Fluid Dynamics Studies biodegradable polymer synthesis and properties Injection Molding Process and Properties |
| ISSN | 0730-6679 |
| Citation impact (2-yr) | 3.69 |
| h-index | 73 |
| i10-index | 1,105 |
| Total citations | 41,741 |
| Article processing charge | $1,950 |
| Open access | Yes |
| Top institutions publishing here | Stevens Institute of Technology |
| Journal website | www.hindawi.com |
| You get | A submission-ready PDF and the editable LaTeX source — ready to submit. |
Citations each year’s papers have accumulated so far — the most recent years are still building up.
Natural fiber reinforced composites is an emerging area in polymer science. These natural fibers are low cost fibers with low density and high specific properties. These are biodegradable and non-abrasive. The natural fiber composites offer specific properties comparable to those of conventional fiber composites. However, in development of these composites, the incompatibility of the fibers…
Abstract The objective of this article was to review the use of carbon black (CB) as a conductive filler in polymers and polymer blends. Important properties of CB related to its use in conducting polymers are discussed. The effects of polymer structure, molecular weight, surface tension, and processing conditions on electrical resistivity and physical properties…
Abstract Blends of polylactic acid (PLA) and polyhydroxybutyrate (PHB) at a number of different PLA/PHB weight ratios (100/0, 75/25, 50/50, 25/75, 0/100) have been prepared by melt compounding. The morphology, thermal properties, mechanical properties, and biodegradation behavior of these blends have been investigated. The results indicate that PLA/PHB blends are immiscible but exhibit molecular interaction.…
Abstract An overview of the progress in polymer nanocomposites is presented in this paper with an emphasis on the different methods used for preparing polymer‐layered silicate (PLS) nanocomposites and the extent to which properties are enhanced. Other related areas that are also discussed include the types of polymers used in PLS nanocomposites preparation, the types…
Phase change materials (PCMs) are gaining increasing attention and becoming popular in the thermal energy storage field. Microcapsules enhance thermal and mechanical performance of PCMs used in thermal energy storage by increasing the heat transfer area and preventing the leakage of melting materials. Nowadays, a large number of studies about PCM microcapsules have been published…
