DocuGuru
SAGE

Proceedings of the Institution of Mechanical Engineers Part A Power and Process Engineering Template

Write in a clean editor, then format for Proceedings of the Institution of Mechanical Engineers Part A Power and Process Engineering in one click — DocuGuru applies the official SAGE template with author–year references and exports a submission-ready PDF plus the editable LaTeX source. Free to start.

Use this template

About the Proceedings of the Institution of Mechanical Engineers Part A Power and Process Engineering format

Proceedings of the Institution of Mechanical Engineers Part A Power and Process Engineering is a peer-reviewed journal published by SAGE, covering Hydraulic and Pneumatic Systems, Diverse Scientific and Economic Studies, Human auditory perception and evaluation.

PublisherSAGE
Reference styleAuthor–year (Harvard)
Author–year — (Smith, 2023) in the text
Smith, A., Jones, B. and Lee, C. (2023) 'A representative article title', Proceedings of the Institution of Mechanical Engineers Part A Power and Process Engineering, 12(3), pp. 45–58.

Formats any DOI in Proceedings of the Institution of Mechanical Engineers Part A Power and Process Engineering style. No sign-up.

Publishes research inHydraulic and Pneumatic Systems Diverse Scientific and Economic Studies Human auditory perception and evaluation Pharmacy and Medical Practices Advanced Combustion Engine Technologies
ISSN0263-7138
h-index18
i10-index37
Total citations1,508
Top institutions publishing hereCentral Electricity Generating Board
You getA submission-ready PDF and the editable LaTeX source — ready to submit.

Papers published in Proceedings of the Institution of Mechanical Engineers Part A Power and Process Engineering per year

31
1983
36
1984
36
1985
39
1986
36
1987
38
1988

Citation impact of Proceedings of the Institution of Mechanical Engineers Part A Power and Process Engineering by publication year

186
1983
290
1984
217
1985
315
1986
242
1987
258
1988

Citations each year’s papers have accumulated so far — the most recent years are still building up.

Most-cited papers in Proceedings of the Institution of Mechanical Engineers Part A Power and Process Engineering

Fluid Transmission Lines—Distributed Parameter Models Part 1: A Review of the State of the Art

Jacek Stecki, D. C. Davis · 1 Nov 1986

This paper presents a hierarchical classification of linear, distributed parameter models which have been used in the study of rigid, uniform fluid transmission lines. The development of the models from the fundamental equations of fluid dynamics is discussed, and the assumptions necessary in obtaining each model are shown. The solutions to the models are presented…

136 citations Cite SaveGo to paper →
Windage Loss in Larger High-Speed Gears

P H Dawson · 1 Feb 1984

Some preliminary measurements have been made of the windage loss in a number of larger spur gears and one helical gear, in air, and of how this windage loss is affected by speed, size, details of the gear geometry and the shape of enclosures. It is shown that for most gears the larger part of…

123 citations Cite SaveGo to paper →
Linear Dynamics of Free-Piston Stirling Engines

R. Redlich, David M. Berchowitz · 1 Aug 1985

The free-piston Stirling engine (FPSE) is a heat driven mechanical oscillator from which power can be extracted. Linear dynamics is applied here in order to obtain: a stability criterion, a means for determining the oscillation frequency, relative amplitudes of the dynamic components, effects of friction on starting and the locus of the roots of the…

93 citations Cite SaveGo to paper →
Effect of Compression and Expansion on Instantaneous Heat Transfer in Reciprocating Internal Combustion Engines

B Lawton · 1 Aug 1987

Instantaneous heat flux at the surface of a cylinder head in a motored diesel engine has been measured, at various speeds, using a fast-response surface thermocouple. Heat flux during compression was found to be much larger than heat flux during expansion, the maximum heat flux occurred about 8° before top dead centre and there was…

79 citations Cite SaveGo to paper →

Proceedings of the Institution of Mechanical Engineers Part A Power and Process Engineering template — frequently asked questions

How do I write a paper in the Proceedings of the Institution of Mechanical Engineers Part A Power and Process Engineering format?
In DocuGuru you write your manuscript in a normal editor — no LaTeX setup required — and select the Proceedings of the Institution of Mechanical Engineers Part A Power and Process Engineering template. When you export, DocuGuru compiles the paper into the official SAGE format and hands you a submission-ready PDF along with the editable LaTeX source.
What reference style does Proceedings of the Institution of Mechanical Engineers Part A Power and Process Engineering use?
Proceedings of the Institution of Mechanical Engineers Part A Power and Process Engineering uses Author–year (Harvard) references, shown as author–year markers such as (Smith, 2023) in the text. DocuGuru formats every in-text citation and the reference list in this exact style automatically. A reference appears like this: Smith, A., Jones, B. and Lee, C. (2023) 'A representative article title', Proceedings of the Institution of Mechanical Engineers Part A Power and Process Engineering, 12(3), pp. 45–58.
Do I need to know LaTeX to submit to Proceedings of the Institution of Mechanical Engineers Part A Power and Process Engineering?
No. DocuGuru generates the sagej LaTeX class and compiles the PDF for you in the background, so you get a SAGE-ready Proceedings of the Institution of Mechanical Engineers Part A Power and Process Engineering document without writing any LaTeX. If you do want it, the LaTeX source is included in the export.
Can I import an existing draft into the Proceedings of the Institution of Mechanical Engineers Part A Power and Process Engineering template?
Yes. Paste or upload your current manuscript — Word, LaTeX, Markdown, or plain text — and DocuGuru reflows it into the Proceedings of the Institution of Mechanical Engineers Part A Power and Process Engineering format with correct headings, figures, tables, and author–year citations.
Who publishes Proceedings of the Institution of Mechanical Engineers Part A Power and Process Engineering?
Proceedings of the Institution of Mechanical Engineers Part A Power and Process Engineering is a multidisciplinary journal published by SAGE. DocuGuru's Proceedings of the Institution of Mechanical Engineers Part A Power and Process Engineering template matches SAGE's official submission format.
Can I export a submission-ready Proceedings of the Institution of Mechanical Engineers Part A Power and Process Engineering PDF?
Yes — DocuGuru produces a PDF built with the official Proceedings of the Institution of Mechanical Engineers Part A Power and Process Engineering template (the sagej class) that is ready to submit to SAGE, together with the matching LaTeX source files.
How much does the Proceedings of the Institution of Mechanical Engineers Part A Power and Process Engineering template cost?
You can start writing in the Proceedings of the Institution of Mechanical Engineers Part A Power and Process Engineering template for free. Exporting the final submission-ready Proceedings of the Institution of Mechanical Engineers Part A Power and Process Engineering PDF and LaTeX source is part of DocuGuru's paid plans — see the app for current pricing.
Use the Proceedings of the Institution of Mechanical Engineers Part A Power and Process Engineering template