Inderscience

International Journal of Oil Gas and Coal Technology Template

Write in a clean editor, then format for International Journal of Oil Gas and Coal Technology in one click — DocuGuru applies the official Inderscience template with author–year references and exports a submission-ready PDF plus the editable LaTeX source. Free to start.

About the International Journal of Oil Gas and Coal Technology format

International Journal of Oil Gas and Coal Technology is a peer-reviewed journal published by Inderscience, covering Hydraulic Fracturing and Reservoir Analysis, Hydrocarbon exploration and reservoir analysis, Reservoir Engineering and Simulation Methods.

PublisherInderscience
Reference styleAuthor–year (Harvard/AGSM)
Author–year — (Smith, 2023) in the text
Smith, A., Jones, B. and Lee, C. (2023) 'A representative article title', International Journal of Oil Gas and Coal Technology, 12(3), pp. 45–58.

Formats any DOI in International Journal of Oil Gas and Coal Technology style. No sign-up.

Publishes research inHydraulic Fracturing and Reservoir Analysis Hydrocarbon exploration and reservoir analysis Reservoir Engineering and Simulation Methods Enhanced Oil Recovery Techniques Coal Properties and Utilization
ISSN1753-3309
Citation impact (2-yr)0.35
h-index25
i10-index148
Total citations5,882
Top institutions publishing hereChina University of Mining and Technology
Journal websitewww.inderscience.com
You getA submission-ready PDF and the editable LaTeX source — ready to submit.

Papers published in International Journal of Oil Gas and Coal Technology per year

52
2014
58
2015
107
2016
122
2017
176
2018
148
2019
168
2020
155
2021
125
2022
97
2023
95
2024
122
2025

Citation impact of International Journal of Oil Gas and Coal Technology by publication year

384
2014
629
2015
564
2016
597
2017
621
2018
431
2019
398
2020
235
2021
177
2022
152
2023
75
2024
21
2025

Citations each year’s papers have accumulated so far — the most recent years are still building up.

Most-cited papers in International Journal of Oil Gas and Coal Technology

Chemical flood enhanced oil recovery: a review

Ajay Mandal · 1 Jan 2015

Chemical flooding has been found to be one of the major EOR techniques especially for reservoirs where thermal methods are not feasible. The application of chemical flooding is strongly influenced by the current economics, type of reserve oil and crude oil price. In this paper, an up to date status of chemical flooding at the…

Review of coal as a promising source of lithium

Shenjun Qin, Cunliang Zhao, Yanheng Li et al. · 1 Jan 2015

Coals are a major source of pollution in certain parts of the world due to mining, coal combustion, and disposal of fly ash. The recovery of valuable rare metals from coals or coal-processing byproducts is a promising way to utilise these traditional resources economically, efficiently and in an environmentally friendly way. Lithium, a highly interesting…

A unified perspective on the phase behaviour of petroleum fluids

G. Ali Mansoori · 1 Jan 2009

We present a coherent and unified group of general explanations for the various phase transitions, which may occur in the seven naturally occurring petroleum fluids with emphasis on their heavy organics. The seven petroleum fluids include, in the order of their fluidity, natural gas, near-critical gas-condensate, light crude, intermediate crude, heavy oil, tar sand and…

Biomass gasification with pure steam in fluidised bed: 12 variables that affect the effectiveness of the biomass gasifier

José Corella, José M Toledo, Gregorio Molina · 1 Jan 2008

Biomass gasification in fluidised bed with pure steam has already generated a 60 vol.%, dry basis, H2 rich gas that was increased to 70?80 vol.% H2 by using a CO2 sorbent in the gasifier bed. A tar content as low as 0.25 g/Nm? has also been reported when an active catalyst is used in the…

Three-dimensional pore networks and transport properties of a shale gas formation determined from focused ion beam serial imaging

Thomas Dewers, Jason E. Heath, Russ Ewy et al. · 1 Jan 2012

Three-dimensional pore network reconstructions of mudstone properties are made using dual focused ion beam-scanning electron microscopy (FIB-SEM). Samples of Jurassic Haynesville Formation mudstone are examined with FIB-SEM and image analysis to determine pore properties, topology, and tortuosity. Resolvable pore morphologies (>~10 nm) include large slit-like pores between clay aggregates and smaller pores in strain shadows…

International Journal of Oil Gas and Coal Technology template — frequently asked questions

How do I write a paper in the International Journal of Oil Gas and Coal Technology format?
In DocuGuru you write your manuscript in a normal editor — no LaTeX setup required — and select the International Journal of Oil Gas and Coal Technology template. When you export, DocuGuru compiles the paper into the official Inderscience format and hands you a submission-ready PDF along with the editable LaTeX source.
What reference style does International Journal of Oil Gas and Coal Technology use?
International Journal of Oil Gas and Coal Technology uses Author–year (Harvard/AGSM) references, shown as author–year markers such as (Smith, 2023) in the text. DocuGuru formats every in-text citation and the reference list in this exact style automatically. A reference appears like this: Smith, A., Jones, B. and Lee, C. (2023) 'A representative article title', International Journal of Oil Gas and Coal Technology, 12(3), pp. 45–58.
Do I need to know LaTeX to submit to International Journal of Oil Gas and Coal Technology?
No. DocuGuru generates the singlecol-new LaTeX class and compiles the PDF for you in the background, so you get a Inderscience-ready International Journal of Oil Gas and Coal Technology document without writing any LaTeX. If you do want it, the LaTeX source is included in the export.
Can I import an existing draft into the International Journal of Oil Gas and Coal Technology template?
Yes. Paste or upload your current manuscript — Word, LaTeX, Markdown, or plain text — and DocuGuru reflows it into the International Journal of Oil Gas and Coal Technology format with correct headings, figures, tables, and author–year citations.
Who publishes International Journal of Oil Gas and Coal Technology?
International Journal of Oil Gas and Coal Technology is a engineering and computer science journal published by Inderscience. DocuGuru's International Journal of Oil Gas and Coal Technology template matches Inderscience's official submission format.
Can I export a submission-ready International Journal of Oil Gas and Coal Technology PDF?
Yes — DocuGuru produces a PDF built with the official International Journal of Oil Gas and Coal Technology template (the singlecol-new class) that is ready to submit to Inderscience, together with the matching LaTeX source files.
How much does the International Journal of Oil Gas and Coal Technology template cost?
You can start writing in the International Journal of Oil Gas and Coal Technology template for free. Exporting the final submission-ready International Journal of Oil Gas and Coal Technology PDF and LaTeX source is part of DocuGuru's paid plans — see the app for current pricing.
Use the International Journal of Oil Gas and Coal Technology template