Write in a clean editor, then format for Additive Manufacturing Letters in one click — DocuGuru applies the official Elsevier template with numbered references and exports a submission-ready PDF plus the editable LaTeX source. Free to start.
Additive Manufacturing Letters is a peer-reviewed journal published by Elsevier, covering Additive Manufacturing Materials and Processes, Additive Manufacturing and 3D Printing Technologies, High Entropy Alloys Studies.
| Publisher | Elsevier |
|---|---|
| Reference style | Numbered (Elsevier) Numbered — [1], [2] in the text [1] A. Smith, B. Jones, C. Lee, A representative article title, Additive Manufacturing Letters 12 (2023) 45–58.
Formats any DOI in Additive Manufacturing Letters style. No sign-up. |
| Publishes research in | Additive Manufacturing Materials and Processes Additive Manufacturing and 3D Printing Technologies High Entropy Alloys Studies Welding Techniques and Residual Stresses Aluminum Alloys Composites Properties |
| ISSN | 2772-3690 |
| Citation impact (2-yr) | 3.58 |
| h-index | 29 |
| i10-index | 135 |
| Total citations | 3,747 |
| Article processing charge | $1,250 |
| Open access | Yes |
| Top institutions publishing here | Oak Ridge National Laboratory |
| Journal website | www.journals.elsevier.com |
| You get | A submission-ready PDF and the editable LaTeX source — ready to submit. |
Citations each year’s papers have accumulated so far — the most recent years are still building up.
Laser melting technologies in welding and additive manufacturing, such as laser powder bed fusion, promises to revolutionize manufacturing. However, a challenge remains in preventing pore defects produced by melt pool instabilities, which degrade part quality. Using X-ray imaging synchronized with ultrahigh-speed (40 ns) absorption radiometry and coupled with high-fidelity simulations, we discovered that periodic oscillations…
The additive friction stir deposition (AFSD) of Ti6Al4V alloy was successfully performed over a wide processing window. The microstructures were examined based on the high atemperature β grain size, grain boundary α formation and the propensity of variant selection as a function of process parameters. The analysis revealed that a reduction in deposition temperature could…
The use of additive manufacturing (AM) and its particular realization – laser powder bed fusion (L-PBF) – is on the rise. However, the method is not free from flaws, mainly represented by structural defects of the printed specimen, such as cracks and pores, requiring processing monitoring. In this work, we propose a concept of the…
Keyhole pore formation is one of the most detrimental subsurface defects in the laser metal additive manufacturing process. However, effective ways to mitigate keyhole pore formation beyond tuning laser processing conditions during keyhole mode laser melting are still lacking. Here we report a novel approach to mitigate keyhole pore formation during laser powder bed fusion…
The laser powder bed fusion (LPBF) of pure tungsten for the fabrication of near-fully dense components is challenging owing to the intrinsic properties of tungsten. In this study, routine, gas-atomized, and plasma-processed tungsten powder samples were characterized for their powder shape, size distribution, tapped density, and flowability, and then used to fabricate parts using identical…
